How to root all models of tecno phone

How to root Tecno phones
In this article, I will show you how to root most tecno phones. If your phone model is not here you can still go ahead and try it at your own risk. No risk, no gain. Here are they list of tecno phone i have tried on and it worked.  Tecno A+(f7), A2(f8) , s3, h5, m3, p5, l3, d3, d5, n7, n9, p9, m7, q1, s5, b3, d9, m5, m9 (A3) and s7.
How to root Tecno Q1, H5, N7, D5, D9, M5, P5, S3, S5, P9, M7 and M3
Procedure
1. Download Framaroot to your
device
2. Launch and Install Framaroot
3. Click on Install Supersu
4. Click on Boromir
5. You are rooted
How to root tecno L3
To root your Tecno L3, you'll need:
1. A Computer and USB debugging enabled on your L3
2. A USB cable to connect the Tecno L3 to the
computer
3. Download SHUAME
4. Install Root Checker on your phone to know if you
are have been granted Root access
Follow these steps carefully.
- After the download of shuame on your PC, install it
- Connect your TECNO L3 and Launch SHUAME
allow the shuame load the phone name and build
etc.

now click on what is circled in the picture below

Note: if you see the red alert on the -~# Root it
simply means you have not been rooted and also
that you can root the phone using the software. but
if not either you have been rooted or you cant root
your device with the software.
After few minutes you should get this screen

After rooting you should have

Congrats, your L3 is rooted
To root tecno phantom A, A+ , A2, N9, B3 and D3
What you will need
1.A laptop or desktop computer
2. Download and Install PdaNet+
3. Download Eroot
4.The USB cable of your phone.
How to root your Tecno Phantom A, A+ , A2, B3, S7 and D3
* Download Eroot
* Download PdaNet
* Enable USB debugging on the phone (Settings > Developer > Tick USB Debugging)
* Connect the phone to the PC then install PdaNet, you should get a "Drivers successfully installed" message at the end of installation
* Launch Eroot
* A root button will appear. If it doesn't, close
the PdaNet running from your system tray.
* Click on the root button and your phone will be
rooted in 10 seconds.
How to root Tecno M9 (A3)
Step 1 - Backup all the data on your device
before start the vRoot process.
Step 2 - Download the android VRoot tool NOTE: If you are Non-Chines please use vroot english version
Step 3 - Enable debugging on your android
device.(Settings-->Developer options-->USB debugging)
Step 4 - Open the VRoot software on your
computer.
Step 5 - Connect the PC and the android device.
Step 6 - Once you connect the device and pc it will automatically detect your smart phone.
Step 7 - Then click the "Root" button to start the
rooting process.
Step 8 - Device will reboot automatically and
confirm by the Vroot software
Howto root Tecno N3, D3, D5 and P3
1. Download poot to your phone
2. Go to settings on the phone > Application: check unknown source > tap preferred install location> select internal device storage > tap development > check USB debugging > Allow mock locations Internet access on the phone.
3. Now you are ready for the main rooting. To root your Tecno phone
4. Go to file explorer on your phone
5. Locate the poot application you downloaded above,
6. Click on it and install it to phone memory.
7. After installing open the installed poot application from your menu icon
8. It will request to download ministro services
9. Download and install Ministro II library from Google play store.
10. Now go back to open the poot application again
11. It will ask to update QT libraries, do that and your phone should restart automatically
12. If it doesn't, restart it yourself.
13. Now remove your memory card and boot the phone without a memory card.
14. Immediately the phone gets to home-screen quickly go tap on the poot application and tap on 'press here to poot'
15. After the above step your phone should shut down automatically (if it doesn't, restart your phone and repeat from step 5).
16. After the phone goes off, it should come back, but if it does not you have to remove the battery and put it back, then start it.
17. Now again quickly tap on the poot aplication immediately your phone gets to the home-screen
18. If every thing goes well then you should see an option to download super user and root checker
16. If not try the steps again till you see
this two options.
17. Now download and install the super user and
root checker from the link on poot.
18. Open up root checker and click verify to check
the status of your phone.
19. You should see 'congratulation your phone has root access'
20. If you get demon materialized while pooting, simply restart and keep trying.

Files to download

Framaroot-1.6.1.apk

Framaroot-1.9.3.apk

com.kingroot.kinguser.apk

Nairabet